CF SERIES 3D MEASUREMENT VIDEOSCOPE
Product Link : http://www.ome-top.com/product_d.php?lang=en&tb=1&id=1351
The 3-D measurement function is a major challenge in the endoscope industry. Whether the process selection of product appearance materials or the research to design software measurement algorithms.
POTOP's R&D team made a large number of feasibility studies and simulation tests.
Main Measurement Function
point-to-point
point-to-line
point to surface depth
multiple point circumference measurement
measurement accuracy ≥ 95%
Intelligent Operation System
Image adjustment: resolution options
Camera parameters setting: brightness/ contrast/ gamma/ ray/ saturation/sharpness
Image effects: auto balance/ negative film/mirror image or rotation/image freezing
Note text: annotation/free drawing/mark
The Importance of Accurate Measurement Remote visual inspection is frequently used to determine the serviceability of an asset. That determination is often based on the measurement of an indication or feature inside the asset. Inaccurate measurements can result in unnecessary downtime, scrap, maintenance costs, and safety or reliability risks. Therefore, inspectors must understand how to properly apply available measurement capabilities to maximize the quality of decision-making. With traditional measurement technologies, such as stereo, shadow, or comparison, the inspector has little ability to assess either the quality of the data used to compute the measurement result or the correctness of the cursor placement for the desired measurement. This can often lead to inaccurate measurements and potentially too costly incorrect decisions. The latest 3D measurement technologies allow the real-time use of a 3D XYZ point cloud to check data quality and cursor placement accuracy from multiple angles and perspectives. This gives inspectors an unprecedented ability to check their work and avoid costly mistakes.
Product Link : http://www.ome-top.com/product_d.php?lang=en&tb=1&id=1351
The 3-D measurement function is a major challenge in the endoscope industry. Whether the process selection of product appearance materials or the research to design software measurement algorithms.
POTOP's R&D team made a large number of feasibility studies and simulation tests.
Main Measurement Function
point-to-point
point-to-line
point to surface depth
multiple point circumference measurement
measurement accuracy ≥ 95%
Intelligent Operation System
Image adjustment: resolution options
Camera parameters setting: brightness/ contrast/ gamma/ ray/ saturation/sharpness
Image effects: auto balance/ negative film/mirror image or rotation/image freezing
Note text: annotation/free drawing/mark
The Importance of Accurate Measurement Remote visual inspection is frequently used to determine the serviceability of an asset. That determination is often based on the measurement of an indication or feature inside the asset. Inaccurate measurements can result in unnecessary downtime, scrap, maintenance costs, and safety or reliability risks. Therefore, inspectors must understand how to properly apply available measurement capabilities to maximize the quality of decision-making. With traditional measurement technologies, such as stereo, shadow, or comparison, the inspector has little ability to assess either the quality of the data used to compute the measurement result or the correctness of the cursor placement for the desired measurement. This can often lead to inaccurate measurements and potentially too costly incorrect decisions. The latest 3D measurement technologies allow the real-time use of a 3D XYZ point cloud to check data quality and cursor placement accuracy from multiple angles and perspectives. This gives inspectors an unprecedented ability to check their work and avoid costly mistakes.
